You may be wondering what would you get with your MFC? There is a push to give you everything you would need, and even some extra features. This will allow you to have a competent machine no matter whether is is an MFI-A Tank or MFL-P. The following are provided:
- Printer
- 64GB? microSD Card
- Starter Cartridges or bottles
- USB-C to ethernet adapter
- Power Cable
Printer
You obviously get the printer you paid for. This is expected, and something everyone provides. The printer is designed to require as little put together as possible. By providing a fully assembled machine is something everyone will want. There will be some assembly. You would need to fill the reservoir tank if you got ink-tank printers. You would also need to remove the packing tapes that is used to keep everything in place.
A series printers will have just 1 paper tray with a priority feeder. The P series will have 2 paper trays with a priority feeder. You can only have 1 paper type per tray. If you find that you are printing multiple paper types, you would likely need a P series.
microSD Card
All Senitrus computers will come with an microSDXC card. This is intended to store frequently printed files, or storing incoming documents that would need your approval. All files will be located in neat folders, and any emails or scans will be saved as a date/time stamps as the filename. The printer can print .eml, .odt, .pdf, and .txt for documents. Images will be an in an image folder with the same as the documents folder with support for .bmp, .gif, .jpg/jpeg, and .png.
Starter Kit
With the mobile printer, it will be a set of starter cartridges which will have a full tank of ink rather than half that many others do. For ink tank printer, this will be ink bottles, and for laser will be the laster cartridges. As with the ink cartridges, a full bottle will be provided. When setting up the printer, one will need to properly load the cartridges or ink bottles.
USB-C to ethernet adapter
All printers have 2 USB-C ports. One is in the front, and the other is in the back. If your printer is not a networked printer, the rear USB port will plug into a computer. If you are connecting to a network, you will use the ethernet adapter in the back USB-C port. This will allow you to plug in an ethernet cable. If you wish to connect, but not ethernet cable, then your setup SD card would have provided SSID?s, and passwords for wifi? connections.
Power Cable
A power cable for your country will be shipped with the printer. This is intended to assure that you have the power cord you need without having to buy an adapter. This is always assumed with the desitination country for the proper power cable.